This is how to use your TouchUpDirect Touch Up Pen Applicator.  Follow these instructions to achieve the best results using a Touch Up Pen. Paint is best applied in temperatures around 70 degrees Fahrenheit. Do not apply in direct sunlight. Before an

This is how to use your TouchUpDirect Touch Up Pen Applicator. &#xA0;Follow these instructions to achieve the best results using a Touch Up Pen.<ol><li style="font-weight: 400; font-size: 16px;">Shake well. </li><li style="font-weight: 400; font-size: 16px;">Remove cap from pen. If this is the first time using the pen, there will not be any color showing on the pen tip until it has been primed. </li><li style="font-weight: 400; font-size: 16px;">Prime the tip of the pen by pressing the pen tip down onto a soft surface several times. Use a firm but gentle force to avoid damaging the pen tip. Paint should saturate the tip within 3-5 pumps of the tip into the pen. If excess paint builds up on the pen tip, wipe with a soft, clean cloth. <img alt="prime-pen.jpg" height="374" src="https://hsfiles.gorgias.help/gm/help-centers/24605/attachments/4bb49eaa-c5b8-4cca-8cd9-b5dae3215e28.jpg" width="500" class="fr-fic fr-dii"> </li><li style="font-weight: 400; font-size: 16px;">Using the pen, lightly dab paint onto the area to be repaired. Apply one coat evenly with this dabbing motion and allow it to dry for 15 minutes. Avoid applying paint outside the area to be repaired. </li><li style="font-weight: 400; font-size: 16px;">Repeat step 4 until the repair area is evenly and thoroughly covered, usually 2-3 coats.&#xA0;If your color is a tricoat, repeat step 4 using the applicator labeled &#x201C;Midcoat&#x201D;, also for 2-3 coats.&#xA0;&#xA0; </li><li style="font-weight: 400; font-size: 16px;">Replace the cap tightly on the pen when finished. Make sure the cap is secured well for proper storage of the pen before your next use.</li></ol><blockquote><h3 class="wysiwyg-text-align-center" id="important">IMPORTANT</h3>Paint is best applied in temperatures around 70 degrees Fahrenheit. Do not apply in direct sunlight.&#xA0; Before any touch up paint project, always test your color with the included test card. Apply the color and clearcoat onto the test card using the directions above. Compare the color applied on the test card with the color on the vehicle to be painted. If the colors match, proceed with painting. If the colors do not match,<a href="https://help.touchupdirect.com/en-US/contact">&#xA0;stop and contact us immediately</a>.</blockquote>

How Do I Use a Touch Up Pen?

The Pen Essential Kit is perfect for touching up small chips and minor paint nicks. It includes Colorcoat and Clearcoat, allowing you to restore color and protection to lightly damaged areas. If the color doesn’t match, pause the application and cont

<img alt="pen-essential.jpg" height="225" src="https://hsfiles.gorgias.help/gm/help-centers/24605/attachments/6731a4b6-a0e5-4e7f-9796-6540bad2af43.jpg" style="font-family: -apple-system, BlinkMacSystemFont, &quot;Segoe UI&quot;, Helvetica, Arial, sans-serif;" width="300" class="fr-fic fr-dii"><h2 id="the-touch-up-pen-essential-kit-includes">The Touch Up Pen Essential Kit includes&#xA0;</h2>The Pen Essential Kit is perfect for touching up small chips and minor paint nicks. It includes Colorcoat and Clearcoat, allowing you to restore color and protection to lightly damaged areas. <blockquote id="isPasted"><h3 id="before-you-start">BEFORE YOU START</h3><ul><li style="font-size: 16px; color: rgb(0, 0, 0);"><div data-offset-key="3tnku-0-0"><a href="https://instructions.touchupdirect.com/en/using-the-touchupdirect-test-card-with-touch-up-pen-brush-or-combo-applicator-07-apr-2025-20-08-57-442?step=1" rel="noopener noreferrer" target="_blank" style=" text-decoration: underline rgba(111, 45, 168, 0.4);">Test your paint color</a> with a test card.</div></li><li style="font-size: 16px; color: rgb(0, 0, 0);"><div data-offset-key="7horm-0-0"><a href="https://instructions.touchupdirect.com/en/tesla-touch-up-paint-repair-21-apr-2025-20-36-29-711?step=1" rel="noopener noreferrer" target="_blank" style=" text-decoration: underline rgba(111, 45, 168, 0.4);">How to prime the touch up pen</a>.</div></li></ul>If the color doesn&#x2019;t match, pause the application and contact us through our <a href="https://touchupdirect.com/products/color-match-guarantee/" target="_blank" rel="noopener noreferrer">Color Match Guarantee</a> for assistance. Paint is best applied in temperatures around 70 degrees Fahrenheit. Do not apply in direct sunlight.</blockquote><h2 class="wysiwyg-text-align-center" id> </h2><h2 class="wysiwyg-text-align-center" id="part-1---prepare-the-surface-cleaning">PART 1 - Prepare the Surface: Cleaning</h2>Approximate time to complete*: 15&#xA0;MinutesWhat you need for PART 1:<ul><li style="font-weight: 400; color: rgb(0, 0, 0); font-size: 16px;">Soap and water&#xA0;</li></ul><ol><li style="font-weight: 400; color: rgb(0, 0, 0); font-size: 16px;">Clean the entire vehicle or part with soap and water to remove surface dirt. Make sure to rinse and dry the surface thoroughly.&#xA0;</li><li style="font-weight: 400; color: rgb(0, 0, 0); font-size: 16px;">Assess the exposed areas of the damage.&#xA0;</li></ol><h2 data-start="1190" data-end="1251" id="isPasted">Before You Start Painting &#x2013;&#xA0;<a href="https://instructions.touchupdirect.com/en/tesla-touch-up-paint-repair-21-apr-2025-20-36-29-711?step=1" target="_blank" rel="noopener noreferrer">Prime the Touch Up Pens</a></h2>Before using any of the Touch Up Pens (Primer, Colorcoat, or Clearcoat), you&#x2019;ll need to prime the pen tip:<img alt="prime-pen.jpg" src="https://attachments.gorgias.help/bVpA37l3plo2J5oE/hc/8X1Bk7djoE6KgRm0/2025050915-89e05325-8ef2-4f14-99fe-c3d15818c235-71248c29-63d3-4e1d-80ac-3f54896453b0.png" width="500" class="fr-fic fr-dii" style="width: 345px;"><ul data-start="1361" data-end="1604"><li data-start="1361" data-end="1380" style="color: rgb(0, 0, 0);">Remove the cap.</li><li data-start="1361" data-end="1380" style="color: rgb(0, 0, 0);">Press the tip down on a soft surface a few times until the tip is saturated (typically 3&#x2013;5 pumps).</li><li data-start="1484" data-end="1604" style="color: rgb(0, 0, 0);">If excess paint builds up, gently wipe it off with a soft cloth. Repeat this step for each pen before its first use.</li></ul><h2 class="wysiwyg-text-align-center" id="-1"> </h2><h2 class="wysiwyg-text-align-center" id="part-2---apply-colorcoat">PART 2 - Apply Colorcoat</h2>Approximate time to complete*: 30 MinutesWhat you need for PART 2:<ul><li data-start="201" data-end="227" style="font-size: 16px; color: rgb(0, 0, 0);">Colorcoat Touch-Up Pen</li><li data-start="228" data-end="296" style="font-size: 16px; color: rgb(0, 0, 0);">*Tricoat colors include two Colorcoat pens: Basecoat and Midcoat</li></ul><ol><li data-start="301" data-end="385" style="font-size: 16px; color: rgb(0, 0, 0);">Use the Wax &amp; Grease Remover Wipe again, wiping in one direction.</li><li data-start="389" data-end="426" style="font-size: 16px; color: rgb(0, 0, 0);">Shake the Colorcoat pen thoroughly.</li><li data-start="430" data-end="560" style="font-size: 16px; color: rgb(0, 0, 0);">Lightly dab the Colorcoat (*Basecoat for Tricoat) onto the repaired area. Apply a thin, even coat and let it dry for 15 minutes.</li><li data-start="564" data-end="622" style="font-size: 16px; color: rgb(0, 0, 0);">Repeat for 2&#x2013;3 coats or until the area is fully covered.</li><li data-start="626" data-end="713" style="font-size: 16px; color: rgb(0, 0, 0);">*For Tricoat colors, repeat steps 2&#x2013;4 using the Midcoat pen.</li><li data-start="717" data-end="769" style="font-size: 16px; color: rgb(0, 0, 0);">Recap the pen tightly after use to prevent drying.</li></ol><h2 class="wysiwyg-text-align-center" id="-2">&#xA0;</h2><h2 class="wysiwyg-text-align-center" id="part-3---apply-clearcoat">PART 3 - Apply Clearcoat</h2>Approximate time to complete*: 30 MinutesWhat you need for PART 3:<ul><li style="font-weight: 400; color: rgb(0, 0, 0); font-size: 16px;">Clearcoat&#xA0;Touch Up Pen&#xA0;&#xA0;</li></ul><ol><li style="font-weight: 400; color: rgb(0, 0, 0); font-size: 16px;">Shake clearcoat well.</li><li style="font-weight: 400; color: rgb(0, 0, 0); font-size: 16px;">Dab on a light, even layer of clearcoat. The first coat should have thorough, even coverage. &#xA0;Allow to dry for 15 minutes.</li><li style="font-weight: 400; color: rgb(0, 0, 0); font-size: 16px;">Repeat step 2 for up to 4 total coats. Do not exceed 4 coats.</li><li style="font-weight: 400; color: rgb(0, 0, 0); font-size: 16px;">Clearcoat will be dry to handle within 30 minutes. Allow to dry for 48 hours before wet sanding, polishing, or waxing.&#xA0;</li></ol>* Actual implementation times may vary

How to Use the Touch Up Pen Essential Kit

The Pen Preferred Kit is designed for small scratches (under 0.25" wide) where the damage reaches bare metal or plastic. It includes Primer, Colorcoat, and Clearcoat. The Primer ensures proper paint adhesion and protects exposed surfaces, while the C

<img alt="pen-preferred.jpg" height="225" src="https://hsfiles.gorgias.help/gm/help-centers/24605/attachments/e62cc1dd-2ebb-4e39-b666-0f85ceeef35e.jpg" width="300" class="fr-fic fr-dii"><h2 id="the-touch-up-pen-preferred-kit-includes">The Touch Up Pen Preferred Kit includes</h2>The Pen Preferred Kit is designed for small scratches (under 0.25&quot; wide) where the damage reaches bare metal or plastic. It includes Primer, Colorcoat, and Clearcoat. The Primer ensures proper paint adhesion and protects exposed surfaces, while the Clearcoat finishes the job with added durability and shine.<blockquote id="isPasted"><h3 id="before-you-start">BEFORE YOU START</h3><ul><li style="font-size: 16px; color: rgb(0, 0, 0);"><div data-offset-key="3tnku-0-0"><a href="https://instructions.touchupdirect.com/en/using-the-touchupdirect-test-card-with-touch-up-pen-brush-or-combo-applicator-07-apr-2025-20-08-57-442?step=1" rel="noopener noreferrer" target="_blank" style=" text-decoration: underline rgba(111, 45, 168, 0.4);">Test your paint color</a> with a test card.</div></li><li style="font-size: 16px; color: rgb(0, 0, 0);"><div data-offset-key="7horm-0-0"><a href="https://instructions.touchupdirect.com/en/tesla-touch-up-paint-repair-21-apr-2025-20-36-29-711?step=1" rel="noopener noreferrer" target="_blank" style=" text-decoration: underline rgba(111, 45, 168, 0.4);">How to prime the touch up pen</a>.</div></li></ul>If the color doesn&#x2019;t match, pause the application and contact us through our <a href="https://touchupdirect.com/products/color-match-guarantee/" target="_blank" rel="noopener noreferrer">Color Match Guarantee</a> for assistance. Paint is best applied in temperatures around 70 degrees Fahrenheit. Do not apply in direct sunlight.</blockquote><h3 class="wysiwyg-text-align-center" id>&#xA0;</h3><h2 class="wysiwyg-text-align-center" id="part-1---prepare-the-surface">PART 1 - Prepare the Surface</h2>Approximate time to complete*: 30-60 MinutesWhat you need for PART 1:<ul><li style="font-weight: 400; font-family: Arial, Helvetica, sans-serif; font-size: 16px; color: rgb(0, 0, 0);">Soap and water&#xA0;</li><li style="font-weight: 400; font-family: Arial, Helvetica, sans-serif; font-size: 16px; color: rgb(0, 0, 0);">Sandpaper (optional)</li><li style="font-weight: 400; font-family: Arial, Helvetica, sans-serif; font-size: 16px; color: rgb(0, 0, 0);">Wax and grease remover</li><li style="font-weight: 400; font-family: Arial, Helvetica, sans-serif; font-size: 16px; color: rgb(0, 0, 0);"><a href="https://touchupdirect.com/shop/accessories/auto-motorcycle-paint-preparation/premium-masking-tape/" target="_blank" rel="noopener noreferrer">Masking tape</a> (optional)</li></ul><ol><li data-start="391" data-end="493" style="color: rgb(0, 0, 0);">Wash the entire area with soap and water to remove surface dirt. Rinse thoroughly and let it dry.</li><li data-start="494" data-end="708" style="color: rgb(0, 0, 0);">For small scratches, sanding is usually not required. Only sand if the surface feels uneven. Use light pressure and stay within the damaged area to avoid scuffing surrounding paint. (See: <a href="https://help.touchupdirect.com/en-US/prep-sanding-369208" target="_blank" rel="noopener noreferrer">Sanding Instructions</a>)</li><li data-start="709" data-end="746" style="color: rgb(0, 0, 0);">Clean and dry the surface again.</li><li data-start="747" data-end="865" style="color: rgb(0, 0, 0);">Use the Wax &amp; Grease Remover Wipe to gently clean the area in one direction to remove any remaining contaminants.</li><li data-start="866" data-end="960" style="color: rgb(0, 0, 0);">(Optional) Tape off the area to protect surrounding surfaces during sanding and painting.</li><li data-start="961" data-end="1183" style="color: rgb(0, 0, 0);">Check the damaged spot:<ul data-start="993" data-end="1183" style="color: initial;"><li data-start="993" data-end="1074" style="color: rgb(0, 0, 0);">If bare metal or plastic is visible, Primer is required (continue to Part 2).</li><li data-start="1078" data-end="1183" style="color: rgb(0, 0, 0);">If the surface is already primed or not down to bare substrate, skip to Part 3 &#x2013; Apply Colorcoat.</li></ul></li></ol> <h2 data-start="1190" data-end="1251" id="isPasted">Before You Start Painting &#x2013;&#xA0;Prime the Touch Up Pens</h2>Before using any of the Touch Up Pens (Primer, Colorcoat, or Clearcoat), you&#x2019;ll need to prime the pen tip:<img alt="prime-pen.jpg" src="https://attachments.gorgias.help/bVpA37l3plo2J5oE/hc/8X1Bk7djoE6KgRm0/2025050915-89e05325-8ef2-4f14-99fe-c3d15818c235-71248c29-63d3-4e1d-80ac-3f54896453b0.png" width="500" class="fr-fic fr-dii"><ul data-start="1361" data-end="1604"><li data-start="1361" data-end="1380" style="color: rgb(0, 0, 0);">Remove the cap.</li><li data-start="1361" data-end="1380" style="color: rgb(0, 0, 0);">Press the tip down on a soft surface a few times until the tip is saturated (typically 3&#x2013;5 pumps).</li><li data-start="1484" data-end="1604" style="color: rgb(0, 0, 0);">If excess paint builds up, gently wipe it off with a soft cloth. Repeat this step for each pen before its first use.</li></ul><h2 id="-1"> </h2><h2 id="isPasted">PART 2 - Apply Primer</h2>Approximate time to complete*: 30 MinutesWhat you need for PART 2:<ul><li style="font-weight: 400; font-family: Arial, Helvetica, sans-serif; font-size: 16px; color: rgb(0, 0, 0);">Primer Touch Up Pen</li></ul><ol><li data-start="1726" data-end="1772" style="font-size: 16px; color: rgb(0, 0, 0);" id="isPasted">Lightly dab Primer into the damaged area.</li><li data-start="1773" data-end="1815" style="font-size: 16px; color: rgb(0, 0, 0);">Let it dry, then apply a second coat.</li><li data-start="1816" data-end="1868" style="font-size: 16px; color: rgb(0, 0, 0);">Allow the Primer to dry fully&#x2014;about 30 minutes.</li><li data-start="1869" data-end="2081" style="font-size: 16px; color: rgb(0, 0, 0);">(Optional) Wet-sand the area using 800-grit sandpaper. Keep both the surface and sandpaper wet, and sand only within the damaged area. The goal is to smooth the Primer without sanding beyond the repair spot.</li></ol><h2 class="wysiwyg-text-align-center" id="-2">&#xA0;</h2><h2 class="wysiwyg-text-align-center" id="part-3---apply-colorcoat">PART 3 - Apply Colorcoat</h2>Approximate time to complete*: 30 MinutesWhat you need for PART 2:<ul><li data-start="201" data-end="227" style="font-size: 16px; color: rgb(0, 0, 0);">Colorcoat Touch-Up Pen</li><li data-start="228" data-end="296" style="font-size: 16px; color: rgb(0, 0, 0);">*Tricoat colors include two Colorcoat pens: Basecoat and Midcoat</li></ul><ol><li data-start="301" data-end="385" style="font-size: 16px; color: rgb(0, 0, 0);">Use the Wax &amp; Grease Remover Wipe again, wiping in one direction.</li><li data-start="389" data-end="426" style="font-size: 16px; color: rgb(0, 0, 0);">Shake the Colorcoat pen thoroughly.</li><li data-start="430" data-end="560" style="font-size: 16px; color: rgb(0, 0, 0);">Lightly dab the Colorcoat (*Basecoat for Tricoat) onto the repaired area. Apply a thin, even coat and let it dry for 15 minutes.</li><li data-start="564" data-end="622" style="font-size: 16px; color: rgb(0, 0, 0);">Repeat for 2&#x2013;3 coats or until the area is fully covered.</li><li data-start="626" data-end="713" style="font-size: 16px; color: rgb(0, 0, 0);">*For Tricoat colors, repeat steps 2&#x2013;4 using the Midcoat pen.</li><li data-start="717" data-end="769" style="font-size: 16px; color: rgb(0, 0, 0);">Recap the pen tightly after use to prevent drying.</li></ol><h2 class="wysiwyg-text-align-center" id="-3"> </h2><h2 class="wysiwyg-text-align-center" id="part-3---apply-clearcoat">PART 3 - Apply Clearcoat</h2>Approximate time to complete*: 30 MinutesWhat you need for PART 3:<ul><li style="font-weight: 400; font-family: Arial, Helvetica, sans-serif; font-size: 16px; color: rgb(0, 0, 0);">Clearcoat</li></ul><ol><li style="font-weight: 400; font-family: Arial, Helvetica, sans-serif; font-size: 16px; color: rgb(0, 0, 0);">Dab on a light, even coat of Clearcoat. The first coat should have thorough, even coverage. &#xA0;Allow to dry for 15 minutes.</li><li style="font-weight: 400; font-family: Arial, Helvetica, sans-serif; font-size: 16px; color: rgb(0, 0, 0);">Repeat step 2 for up to 4 total coats. Do not exceed four coats.</li><li style="font-weight: 400; font-family: Arial, Helvetica, sans-serif; font-size: 16px; color: rgb(0, 0, 0);">Clearcoat will be dry enough to handle within 30 minutes of the last application. Allow it to dry for a full 48 hours before&#xA0;wet sanding,&#xA0;polishing, or waxing.</li></ol>* Actual implementation times may vary

How to Use the Touch Up Pen Preferred Kit

The Pen Platinum Kit is a complete, all-in-one solution for small chip and scratch repairs (under 0.25" wide). It comes with Primer, Colorcoat, and Clearcoat—everything needed from prep to finish. This kit delivers a professional-grade result by seal

<img alt="pen-platinume.jpg" height="225" src="https://hsfiles.gorgias.help/gm/help-centers/24605/attachments/b8861cca-4b46-4028-8332-a1c25713c64e.jpg" width="300" class="fr-fic fr-dii">The Pen Platinum Kit is a complete, all-in-one solution for small chip and scratch repairs&#xA0;(under 0.25&quot; wide). It comes with Primer, Colorcoat, and Clearcoat&#x2014;everything needed from prep to finish. This kit delivers a professional-grade result by sealing and protecting the repaired area with a smooth, lasting finish.<blockquote><h3 class="wysiwyg-text-align-center" id="before-you-start">BEFORE YOU START</h3><ul id="isPasted"><li><a href="https://instructions.touchupdirect.com/en/using-the-touchupdirect-test-card-with-touch-up-pen-brush-or-combo-applicator-07-apr-2025-20-08-57-442?step=1" rel="noopener noreferrer" target="_blank">Test your paint color</a> with a test card.</li><li><a href="https://instructions.touchupdirect.com/en/tesla-touch-up-paint-repair-21-apr-2025-20-36-29-711?step=1" rel="noopener noreferrer" target="_blank" style=" text-decoration: underline rgba(111, 45, 168, 0.4);">How to prime the touch up pen</a>.</li></ul>If the color doesn&#x2019;t match, pause the application and contact us through our <a href="https://touchupdirect.com/products/color-match-guarantee/" target="_blank" rel="noopener noreferrer">Color Match Guarantee</a> for assistance. Paint is best applied in temperatures around 70 degrees Fahrenheit. Do not apply in direct sunlight.</blockquote> <h2 id="isPasted">PART 1 - Prepare the Surface</h2>Approximate time to complete*: 30-60 MinutesWhat you need for PART 1:<ul><li>Soap and water&#xA0;</li><li>Sandpaper (optional)</li><li>Wax and grease remover</li><li><a href="https://touchupdirect.com/shop/accessories/auto-motorcycle-paint-preparation/premium-masking-tape/" target="_blank" rel="noopener noreferrer">Masking tape</a> (optional)</li></ul><ol><li data-start="391" data-end="493" id="isPasted">Wash the entire area with soap and water to remove surface dirt. Rinse thoroughly and let it dry.</li><li data-start="494" data-end="708">For small scratches, sanding is usually not required. Only sand if the surface feels uneven. Use light pressure and stay within the damaged area to avoid scuffing the surrounding paint. (See: <a href="https://help.touchupdirect.com/en-US/prep-sanding-369208" target="_blank" rel="noopener noreferrer">Sanding Instructions</a>)</li><li data-start="709" data-end="746">Clean and dry the surface again.</li><li data-start="747" data-end="865">Use the Wax &amp; Grease Remover Wipe to gently clean the area in one direction to remove any remaining contaminants.</li><li data-start="866" data-end="960">(Optional) Tape off the area to protect surrounding surfaces during sanding and painting.</li><li data-start="961" data-end="1183">Check the damaged spot:<ul><li>If bare metal or plastic is visible, Primer is required (continue to Part 2).</li><li>If the surface is already primed or not down to bare substrate, skip to Part 3 &#x2013; Apply Colorcoat.</li></ul></li></ol><h2 data-start="1190" data-end="1251" id> </h2><h2 data-start="1190" data-end="1251" id="isPasted">Before You Start Painting &#x2013;&#xA0;<a href="https://instructions.touchupdirect.com/en/tesla-touch-up-paint-repair-21-apr-2025-20-36-29-711?step=1" target="_blank" rel="noopener noreferrer">Prime the Touch Up Pens</a></h2>Before using any of the Touch Up Pens (Primer, Colorcoat, or Clearcoat), you&#x2019;ll need to prime the pen tip:<img alt="prime-pen.jpg" src="https://attachments.gorgias.help/bVpA37l3plo2J5oE/hc/8X1Bk7djoE6KgRm0/2025050915-89e05325-8ef2-4f14-99fe-c3d15818c235-71248c29-63d3-4e1d-80ac-3f54896453b0.png" width="500" id="isPasted" class="fr-fic fr-dii"><ul data-start="1361" data-end="1604"><li data-start="1361" data-end="1380">Remove the cap.</li><li data-start="1361" data-end="1380">Press the tip down on a soft surface a few times until the tip is saturated (typically 3&#x2013;5 pumps).</li><li data-start="1484" data-end="1604">If excess paint builds up, gently wipe it off with a soft cloth. Repeat this step for each pen before its first use.</li></ul><h2 id="-1"> </h2><h2 id="isPasted">PART 2 - Apply Primer</h2>Approximate time to complete*: 30 MinutesWhat you need for PART 2:<ul><li style="font-weight: 400; font-family: Arial, Helvetica, sans-serif; font-size: 16px; color: rgb(0, 0, 0);">Primer Touch Up Pen</li></ul><ol data-start="1726" data-end="2081" id="isPasted"><li data-start="1726" data-end="1772">Lightly dab Primer into the damaged area.</li><li data-start="1773" data-end="1815">Let it dry, then apply a second coat.</li><li data-start="1816" data-end="1868">Allow the Primer to dry fully&#x2014;about 30 minutes.</li><li data-start="1869" data-end="2081">(Optional) Wet-sand the area using 800-grit sandpaper. Keep both the surface and sandpaper wet, and sand only within the damaged area. The goal is to smooth the Primer without sanding beyond the repair spot.</li></ol><h2 id="-2">&#xA0;</h2><h2 id="part-3---apply-colorcoat">PART 3 - Apply Colorcoat</h2>Approximate time to complete*: 30 MinutesWhat you need for PART 2:<ul><li data-start="201" data-end="227">Colorcoat Touch-Up Pen</li><li data-start="228" data-end="296">*Tricoat colors include two Colorcoat pens: Basecoat and Midcoat</li></ul><ol><li data-start="301" data-end="385">Use the Wax &amp; Grease Remover Wipe again, wiping in one direction.</li><li data-start="389" data-end="426">Shake the Colorcoat pen thoroughly.</li><li data-start="430" data-end="560">Lightly dab the Colorcoat (*Basecoat for Tricoat) onto the repaired area. Apply a thin, even coat and let it dry for 15 minutes.</li><li data-start="564" data-end="622">Repeat for 2&#x2013;3 coats or until the area is fully covered.</li><li data-start="626" data-end="713">*For Tricoat colors, repeat steps 2&#x2013;4 using the Midcoat pen.</li><li data-start="717" data-end="769">Recap the pen tightly after use to prevent drying.</li></ol><h3 class="wysiwyg-text-align-center" id="-3">&#xA0;</h3><h2 id="isPasted">PART 4 - Apply Clearcoat</h2>Approximate time to complete*: 30 MinutesWhat you need for PART 3:<ul><li>Clearcoat</li><li>Polishing Compound</li></ul><ol><li>Dab on a light, even coat of Clearcoat. The first coat should have thorough, even coverage. &#xA0;Allow to dry for 15 minutes.</li><li>Repeat step 2 for up to 4 total coats. Do not exceed four coats.</li><li>Clearcoat will be dry enough to handle within 30 minutes of the last application. Allow it to dry for a full 48 hours before&#xA0;wet sanding,&#xA0;polishing, or waxing.</li><li>After the Clearcoat has fully cured (wait at least 48 hours), apply the Polishing Compound to bring out a smooth, glossy finish. Use a clean, soft cloth to gently rub the compound over the painted area in circular motions. This step helps blend the repair with the surrounding paint and restores shine to the surface.</li></ol>* Actual implementation times may vary

How to use the Touch Up Pen Platinum Kit

Primer is required when the surface to be painted exposes bare substrate such as plastic, fiberglass, or any type or metal. Primer will bond with the surface of the substrate and enable the adhesion of the paint to the repair area. TUD Primer can be

Primer is required when the surface to be painted exposes bare substrate such as plastic, fiberglass, or any type or metal. Primer will bond with the surface of the substrate and enable the adhesion of the paint to the repair area. TUD Primer can be used to fill very shallow scratches or chips. If the damaged area is deep, then a spot putty must be used.<ol><li style="font-weight: 400; font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Clean the entire vehicle or part with soap and water to remove surface dirt. Be sure to rinse and dry the surface thoroughly.</li><li style="font-weight: 400; font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Prepare the surface to be repaired using sandpaper (see&#xA0;<a href="/hc/en-us/articles/4406569961883" target="_parent">Sanding Instructions</a>).</li><li style="font-weight: 400; font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Clean again with soap and water. Then remove any remaining contaminants by lightly wiping the area with the&#xA0;<a href="https://touchupdirect.com/shop/accessories/auto-motorcycle-paint-preparation/wax-and-grease-remover-handy-wipe/" target="_self">TUD Wax and Grease Remover</a>.</li><li style="font-weight: 400; font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Use a soft cloth to prime the tip of the&#xA0;Touch Up Pen Primer. Carefully depress the tip until it is saturated with primer. This will take 30-60 seconds.</li><li style="font-weight: 400; font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Tape off the area to be painted. Taping creates a boundary to protect the non-damaged area from any touch up work.</li><li style="font-weight: 400; font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Lightly dab the primer onto the area to be painted. Do not use a drawing or rubbing motion as if using a marker; simply dab. Cover the area thoroughly and allow it to dry for 5-10 minutes.&#xA0; Repeat this process applying 2-3 coats of primer.&#xA0;&#xA0;</li><li style="font-weight: 400; font-size: 16px; font-family: Arial, Helvetica, sans-serif;">The primer covers very well and builds up quickly. If you are attempting to fill or level a scratch or chip using the primer, you can repeat step 6 multiple times. However, after 3 coats, extend the dry time to 15-20 minutes and lightly sand the primer with 800-1000 grit sandpaper. If the damaged area is still not as smooth as you like, repeat step 6.&#xA0;&#xA0;</li><li style="font-weight: 400; font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Once satisfied with the application of the primer, allow it to dry for 15-20 minutes before applying the colorcoat.</li></ol>

How to Use Pen Primer

The colorcoat is the actual color you are painting. Colorcoat is not a good filler, and it is not recommended to apply more than 2-3 coats. The TUD Colorcoat will not appear correct until both paint has dried and clearcoat has been applied. Use the t

The colorcoat is the actual color you are painting. Colorcoat is not a good filler, and it is not recommended to apply more than 2-3 coats.&#xA0;&#xA0;
The TUD Colorcoat will not appear correct until both paint has dried and clearcoat has been applied. Use the test card (included with each order) prior to doing the actual repair so that you can check your color first and have practice on applying the paint.
<ol>
<li aria-level="1" style="font-weight: 400;">
Clean the entire vehicle or part with soap and water to remove surface dirt. Be sure to rinse and dry the surface thoroughly. Remove any remaining contaminants by lightly wiping the area with the <a href="https://touchupdirect.com/shop/accessories/auto-motorcycle-paint-preparation/wax-and-grease-remover-handy-wipe/" target="_self">TUD Wax and Grease Remover</a>.
</li>
<li aria-level="1" style="font-weight: 400;">
Tape off the area to be painted. This will help protect the area around the damage while applying paint.
</li>
<li aria-level="1" style="font-weight: 400;">Use a soft cloth to prime the tip of the Touch Up Pen Colorcoat. Carefully depress the tip until it is saturated with color. This will take 30-60 seconds.</li>
<li aria-level="1" style="font-weight: 400;">
Prior to the first coat, and between all additional coats, using the <a href="https://touchupdirect.com/shop/accessories/auto-motorcycle-paint-preparation/tack-cloth/" target="_self">TUD Tack Cloth</a> is recommended. Lightly dab the colorcoat onto the area to be painted.&#xA0; Do not use a drawing or rubbing motion as if using a marker; simply dab the color on. Cover the area thoroughly and allow it to dry for 15 minutes between coats. Repeat this process applying 2-3 coats of colorcoat or until the area is covered.
</li>
<li aria-level="1" style="font-weight: 400;">If your color is a tricoat, repeat step 4 using the applicator labeled &#x201C;Midcoat&#x201D;, also for 2-3 coats.&#xA0;</li>
<li aria-level="1" style="font-weight: 400;">Allow to dry for 30 minutes before applying the clearcoat.</li>
</ol>

How to Use Pen Colorcoat

The clearcoat provides the gloss on a paint job and is the protective coating designed to withstand the elements. Clearcoat is required to achieve the proper color match. TUD Clearcoat is UV and chemical resistant and is an essential step in a succes

The clearcoat provides the gloss on a paint job and is the protective coating designed to withstand the elements. Clearcoat is required to achieve the proper color match.
TUD Clearcoat is UV and chemical resistant and is an essential step in a successful paint repair.
<ol>
<li aria-level="1" style="font-weight: 400;">Use a soft cloth to prime the tip of the Touch Up Pen Clearcoat. Carefully depress the tip until it is saturated with clearcoat. This will take 30-60 seconds.</li>
<li aria-level="1" style="font-weight: 400;">
Prior to the first coat, and between all additional coats, using the <a href="https://touchupdirect.com/shop/accessories/auto-motorcycle-paint-preparation/tack-cloth/" target="_self">TUD Tack Cloth</a> is recommended. Lightly dab the clearcoat onto the area to be painted. Do not use a drawing or rubbing motion as if using a marker; simply dab the clearcoat on. Cover the area thoroughly and allow it to dry for 15 minutes between coats. Repeat this process applying 2-3 coats of clearcoat. Do not exceed 4 coats.
</li>
<li aria-level="1" style="font-weight: 400;">Allow to dry for 48 hours before polishing.</li>
</ol>
We do not generally recommend wetsanding the clearcoat on small touch up repairs. With smaller types of repairs handled by a touch up pen or touch up brush it is often very easy to accidentally sand through the clearcoat and basecoat, requiring you to redo the project. However, if you feel sanding is critical to the success of your paint project, please see these <a href="/hc/en-us/articles/4406569972635" rel="undefined" target="_parent">Finish Sanding Instructions</a>.

How to Use Pen Clearcoat

Blog

Terms

Shop

Privacy

Contact Us

Track your Order

TouchUpDirect

Learn how to effectively use the TouchUpDirect Touch Up Pen for flawless car paint touch ups. Our detailed guide provides step-by-step instructions to help you achieve professional results.